Welding Symbol Builder

Welders Log - Welding Symbol Builder (Demo)

Start WELDERS LOG - Weld Symbol Builder


Application Requirements

Welders Log is a Windows application which requires .NET Framework 4.6. If you need this installed click the green button below.

Install Framework 4.6

In addition Welders Log is a ClickOnce application that must be started from a browser using either Internet Explorer, Microsoft Edge, or the new Microsoft Edge Chromium. If you are using Internet Explorer or Microsoft Edge no further action on your part should be required. If you have Microsoft Edge Chromium, which is Microsoft Edge version 81 or greater, you may need to turn on ClickOnce Support. To determine your current browser, browser version, and operating system you can go to Detect My Browser. To turn on ClickOnce support see the following instructions below.

Microsoft Edge Chromium - Use the following instructions to enable ClickOnce.

1. Open a new tab in your Microsoft Edge browser.
2. Enter the following edge://flags/#edge-click-once in the URL address and press Enter.
3. Scroll down to the ClickOnce Support setting and select ‘Enable’ from the dropdown list.
4. Restart the browser.

If you are having any issues in using the software please do not hesitate to Contact Us and we will help resolve any problems that you are having.

Further Assistance

If you are having trouble starting the software please do not hesitate to Contact Us.

By Phone:
+1 919 473 3045

By EMail: